Error code E2 indicates a sensor malfunction or temperature control issue on your Asko cooktop. This error typically prevents the cooktop from operating safely until the problem is resolved.
• Cooktop will not heat or respond to temperature adjustments
• Display shows E2 error code continuously
• One or more burners are unresponsive
• Heat output is irregular or inconsistent
• Cooktop shuts off unexpectedly during cooking
• Control panel buttons may not respond properly
• Beeping sounds accompanied by error display
🔧
Possible Causes
• Temperature sensor malfunction or sensor disconnection
• Thermal protection triggered due to overheating
• Faulty temperature control circuit board
• Cookware detection sensor failure (for induction models)
• Blocked ventilation causing thermal shutdown
• Electrical supply voltage irregularities or power fluctuations
• Damaged or corroded sensor connections
• Control panel calibration error
• Residue or moisture on sensor contacts
✅
Safety Checks You Can Do
• Power cycle the cooktop: Turn off the circuit breaker for 60 seconds, then restore power
• Ensure the cooktop surface is completely clean and dry; wipe away any spills or residue
• Verify proper electrical supply: Check that the circuit breaker has not tripped
• For induction models: Confirm you are using magnetic-compatible cookware (ferromagnetic metal)
• Allow the cooktop to cool completely if it has been in use; wait at least 30 minutes before retrying
• Check that ventilation areas around and beneath the cooktop are not blocked or obstructed
• Inspect the cooktop cord and plug for visible damage or loose connections
• Ensure cookware is properly centered on the burner and making full contact with the surface
• Remove any metal objects or foil near the cooktop that could interfere with sensors
⚠️
NOTE!
If the error code persists, call to schedule your service
Need Professional Assistance?
Our expert technicians are ready to help you with any service needs.
