Asko Oven Error Code F13

⚠️

Problems You May Notice

• Oven refuses to heat or maintain temperature settings • Error code F13 displays on the control panel • Oven may shut off during cooking cycles • Unable to select or adjust temperature settings • Display screen may flicker or show unusual readings • Preheat function fails to complete • Cook time countdown does not start

🔧

Possible Causes

• Faulty oven temperature sensor (RTD or thermistor) unable to communicate with control board • Loose or corroded electrical connections on sensor wiring • Control board malfunction or failure affecting sensor signal processing • Damaged wiring harness between sensor and main control board • Power supply issues causing inadequate voltage delivery to sensor circuits • Thermal cutoff switch activation due to excessive temperatures • Failed capacitors or electronic components on the control board

✅

Safety Checks You Can Do

• Check household circuit breaker: Verify the breaker serving the oven (typically 240V dual-pole breaker) is in the ON position and hasn't tripped • Ensure oven door closes fully: Open and close the door several times, listening for a solid latch click • Verify control panel settings: Press CLEAR or CANCEL to reset any pending commands, then attempt to set temperature again • Allow oven to cool completely: Turn off the oven and wait 30 minutes before attempting to use it again • Power reset the appliance: Locate the circuit breaker serving the oven and switch it OFF for exactly 60 seconds, then switch it back ON • Inspect visible wiring: Look behind the oven (if accessible) for any obviously loose or disconnected wires • Test with a different cooking function: Try broil or bake mode to determine if error is function-specific • Check for obstructions: Ensure nothing is blocking the oven door sensor or preventing the door from closing properly

Asko Oven Error Code F13

Problems You May Notice

Possible Causes

Safety Checks You Can Do

Need Professional Assistance?