Book Now

Asko Refrigerator Error Code E8

Error code E8 indicates a temperature sensor malfunction or thermal control system failure in your Asko refrigerator. This error prevents the appliance from properly regulating internal temperatures, which can compromise food safety and refrigeration performance.

Home Services
⚠️

Problems You May Notice

    • Refrigerator not cooling to proper temperature • Freezer compartment not maintaining frozen state • Inconsistent temperature fluctuations • Error code E8 displayed on control panel • Compressor running continuously without cycling • Frost buildup in freezer or lack of cooling in refrigerator section • Audible alarm or warning sounds from the appliance
🔧

Possible Causes

    • Faulty temperature sensor (thermistor) in refrigerator or freezer compartment • Damaged wiring or loose electrical connections to temperature sensor • Control board malfunction preventing sensor signal processing • Failed thermal probe preventing temperature detection • Condensation or ice accumulation on sensor contacts • Electrical power fluctuation affecting 120V/240V supply to control electronics • Circuit board damage from power surge or voltage spike common in North American electrical systems
✅

Safety Checks You Can Do

    • Verify your home circuit breaker is in the ON position and hasn't tripped; reset if necessary • Ensure the refrigerator door closes completely with no obstructions or misalignment • Check that the freezer door also seals properly if your model has separate compartments • Review all control panel settings and temperature settings to confirm they are correctly configured • Allow the refrigerator to run for 2-4 hours without opening doors to stabilize internal temperature • Unplug the refrigerator or turn OFF the dedicated circuit breaker for exactly 60 seconds, then restore power to reset the control system • Verify the refrigerator is plugged in securely or that the circuit breaker is fully engaged • Wait 30 minutes after power restoration for the system to recalibrate before checking for error code persistence
⚠️

NOTE!

If the error code persists, call to schedule your service

Need Professional Assistance?

Our expert technicians are ready to help you with any service needs.

📞 Schedule Service 🔍 Contact Us