Asko Dryer Error Code F16

Error code F16 on Asko dryers sold in the USA typically indicates a heating element malfunction or thermal sensor failure that prevents the dryer from reaching or maintaining the proper drying temperature. This error prevents the dryer from operating normally to protect against fire hazards and equipment damage.

Home Services

⚠️

Problems You May Notice

• Dryer stops mid-cycle and displays F16 error code on the display panel • No heat is produced during the drying cycle • Clothes remain wet or damp after a complete cycle • Dryer may not start at all when F16 is displayed • Unusual burning smell near the dryer unit • Dryer tumbles but no warm air is generated

🔧

Possible Causes

• Faulty heating element that is broken, burned out, or not functioning properly • Defective thermal sensor or temperature sensor providing incorrect readings • Tripped thermal cutoff switch due to restricted airflow or overheating • Broken or damaged heating element connector or wiring • Lint and debris accumulation blocking airflow to the heating chamber • Clogged or partially blocked exhaust vent reducing air circulation • Malfunctioning control board or heating relay failure • Door latch switch not engaging properly, preventing heat activation

✅

Safety Checks You Can Do

• Remove and thoroughly clean the lint filter before each load and inspect for damage or excessive lint buildup • Check the external dryer vent opening outside your home for blockages, lint accumulation, or debris • Inspect the entire length of the dryer vent hose for kinks, crushing, or disconnections • Ensure the dryer door closes completely and latches securely with an audible click • Verify you are selecting the correct heat setting and drying cycle for your load type • Unplug the dryer from the electrical outlet and wait 60 seconds, then plug it back in to reset the control board • Confirm adequate clearance around the dryer for proper ventilation and air circulation • Check that the dryer is not installed in an excessively cold environment below 50°F

⚠️

NOTE!

If the error code persists, call to schedule your service

Asko Dryer Error Code F16

Problems You May Notice

Possible Causes

Safety Checks You Can Do

Need Professional Assistance?