Error code E8 indicates a temperature sensor malfunction or thermal protection activation on your Asko cooktop. This error typically prevents the cooktop from operating until the issue is resolved or the unit is reset.
• Cooktop displays E8 error code on the control panel and will not heat
• One or more cooking zones become unresponsive
• Cooktop powers off unexpectedly during cooking
• Error code appears after the cooktop has been in use for an extended period
• Display flashes E8 intermittently
• All burners/zones fail to ignite or heat (depending on model)
🔧
Possible Causes
• Temperature sensor failure or malfunction in the cooktop's thermal control system
• Thermal overload protection has been triggered due to excessive heat buildup
• Dirty or obstructed ventilation preventing proper heat dissipation
• Faulty wiring or connection to the temperature sensor
• Control board communication error with temperature monitoring circuit
• Cookware detection sensor failure (on induction models)
• Power supply voltage irregularities causing sensor interference
• Accumulation of debris or moisture near sensor components
✅
Safety Checks You Can Do
• Turn off the cooktop at the main power switch and unplug the unit for 60 seconds, then restore power to attempt a reset
• Allow the cooktop to cool completely for at least 30 minutes before attempting to use again
• Verify that adequate ventilation is available around and above the cooktop; ensure no vents or grilles are blocked
• Clean the cooktop surface thoroughly with a soft, damp cloth and ensure it is completely dry before use
• For induction models: confirm you are using ferromagnetic cookware (cast iron or magnetic stainless steel) that is compatible with induction cooking
• Check that cookware is properly placed on the cooktop surface with full contact
• Inspect the power cord for any visible damage and ensure the cooktop is connected to a properly grounded outlet
• Verify your home's electrical panel is providing stable power by testing another appliance in the same outlet
• Allow adequate spacing around the cooktop to ensure proper air circulation for cooling
• If the error persists after these steps, contact on 844-731-2978
⚠️
NOTE!
If the error code persists, call to schedule your service
Need Professional Assistance?
Our expert technicians are ready to help you with any service needs.
