Error code E10 indicates a water fill or inlet valve fault on your Asko washer. This means the washer is unable to detect proper water entry during the fill cycle, which prevents the washing process from starting or continuing normally.
• Washer will not fill with water during the wash cycle
• Wash cycle starts but stops immediately
• Error code E10 displays on the control panel
• No water visible in the drum after extended fill time
• Clicking or buzzing sounds from inlet valve area
• Washer beeps repeatedly and will not proceed past the fill stage
🔧
Possible Causes
• Clogged or frozen inlet water valve screens (mineral buildup common in hard water areas across North America)
• Water supply valves behind washer not fully opened
• Kinked, bent, or pinched inlet hoses
• Faulty inlet valve solenoid that controls water entry
• Broken water level sensor or pressure switch
• Power supply issue affecting the inlet valve circuit (120V/240V supply problems)
• Failed fill valve unable to open properly
• Circuit board malfunction preventing valve activation
✅
Safety Checks You Can Do
• Check that both hot and cold water supply valves behind the washer are fully turned open (turn counterclockwise)
• Inspect both inlet hoses for visible kinks, cracks, or pinching; straighten any bent sections
• Verify the washer door closes completely and latches properly
• Ensure the cycle selection and water level settings are correct on the control panel
• Turn off the circuit breaker supplying power to the washer for 60 seconds, then turn it back on to perform a complete reset
• Check your home's circuit breaker panel to confirm the breaker for the washer has not tripped; reset if needed
• Disconnect the inlet hoses and inspect the screens at the connection points for debris or mineral deposits; rinse screens under running water if clogged
• Allow the washer to sit unplugged for 5 minutes before restarting to clear any temporary electrical faults
• Run a test cycle with no clothes to see if water fills normally
⚠️
NOTE!
If the error code persists, call to schedule your service
Need Professional Assistance?
Our expert technicians are ready to help you with any service needs.
