Error code F13 indicates a heating or temperature sensor malfunction in your Asko dryer. This error prevents the dryer from reaching proper drying temperatures, which can result in longer drying times or incomplete drying cycles.
• Dryer runs but clothes remain damp or wet after a complete cycle
• Dryer stops mid-cycle and displays F13 error code
• Heat is not being generated during the drying process
• Excessive drying time needed for normal loads
• Error code appears intermittently or consistently
• Dryer may emit a burning smell or no heat at all
🔧
Possible Causes
• Faulty thermal fuse that has blown or tripped
• Defective heating element no longer generating heat
• Malfunctioning temperature sensor unable to read correct temperatures
• Airflow blockage preventing proper heat circulation
• Clogged lint filter restricting airflow and triggering thermal shutdown
• Kinked or obstructed vent hose blocking exhaust flow
• Broken door latch switch preventing proper cycle operation
• Wiring or connection issues to the heating assembly
• Control board malfunction preventing power to heating components
✅
Safety Checks You Can Do
• Remove and thoroughly clean the lint filter before each load to ensure proper airflow
• Inspect the entire vent hose for kinks, bends, or blockages and straighten as needed
• Check that the dryer duct connection outside your home is clear of lint and debris
• Ensure the dryer door closes completely and latches properly with no gaps
• Verify you are using the correct drying cycle and temperature setting for your load type
• Unplug the dryer from the electrical outlet for 60 seconds, then plug it back in to reset the system
• Check that the outdoor vent damper opens freely and is not blocked by lint or weather debris
• Ensure the dryer is not pushed too close to the wall, restricting rear vent airflow
• Run a test cycle with a small load to see if the error recurs after the reset
⚠️
NOTE!
If the error code persists, call to schedule your service
Need Professional Assistance?
Our expert technicians are ready to help you with any service needs.
