ERR6 indicates a temperature sensor malfunction or heating element failure in your Asko oven. This error prevents the oven from operating safely and requires diagnostic attention to restore normal function.
• Oven will not heat or maintains incorrect temperature
• Digital display shows ERR6 code
• Oven beeps repeatedly or continuously
• Unable to select or adjust cooking temperature
• Heating element does not glow or activate
• Oven locks out and becomes unresponsive to controls
• Error code persists even after closing and reopening the door
🔧
Possible Causes
• Faulty oven temperature sensor (RTD or thermistor)
• Broken or damaged heating element (top, bottom, or convection element)
• Loose or disconnected sensor wiring inside the oven cavity
• Control board malfunction preventing sensor signal recognition
• Damaged door latch preventing proper oven door closure
• Thermal overload protection triggered by prolonged high heat
• Power surge damage to internal electronics
• Corroded or damaged connector terminals between sensor and control board
✅
Safety Checks You Can Do
• Power cycle the oven by unplugging it from the electrical outlet for 60 seconds, then plugging it back in
• Ensure the oven door is fully closed and latches securely with an audible click
• Verify you have selected the correct cooking mode (Bake, Broil, or Convection)
• Confirm the temperature setting is appropriate for your desired cooking function
• Allow the oven to cool completely for 30 minutes if it was recently in use
• Check that nothing is blocking the oven vents or air circulation openings
• Remove any aluminum foil or objects from the oven interior that may obstruct sensors
• Verify the outlet is functioning properly by plugging in another appliance
• Check your circuit breaker or fuse box to ensure power is reaching the oven
• Note the exact error code and any accompanying symptoms to report to service technician
⚠️
NOTE!
If the error code persists, call to schedule your service
Need Professional Assistance?
Our expert technicians are ready to help you with any service needs.
